CAREER OPPORTUNITES WITH STMICROELECTRONICS, SINGAPORE

1) Equipment /Maintenance Engineers -- Central Maintenance/Etch

Job Description

As an Equipment Engineer or Senior Engineer in STM Singapore, you will be responsible to:

  Coordinate and drive new equipment (dry pump, chiller and abatement (PCA)) hookup, startup and release.
  Systematic troubleshooting of Lot Tracking hardware related problems to minimize equipment downtime.
  Establish optimum spares and consumables stock to support Lot Tracking hardware maintenance.
  Establish effective Lot Tracking hardware preventive maintenance program and troubleshooting guide.
  Setup effective detection and monitor system to prevent Lot Tracking hardware excursion.
  Drive PCA Continuous Improvement project (CIP) to achieve best in class in service, quality and cost
  Train, coach and certify Assistant Maintenance Engineers and PM Technician in systematic troubleshooting and PM maintenance skill.
  Work closely with Process, module and production engineers to ensure key performance indices are met.

Requirements:

  Master / Bachelor Degree in Electrical / Electronics / Microelectronics / Mechanical / Mechatronics Engineering.
  At least 2 year relevant working experience. Diploma holder with >5years relevant experience will be considered too.
  Attention to detail and have good analytical and problem solving skills
  High commitment and good team player
  Ability to think out of box.
  Good communication and documentation skills

2) Senior/Process Engineers (Etch/Diffusion/CVD/PVD/Wetclean/Epi)

Job Description

  Manage development and process transfer of sub-quarter or sub-micron advanced technologies from R&D to manufacturing
  Set up SPC for developed processes
  Install equipment and setup process specification
  Perform and characterise process and equipment system to maintain and control process parameters
  Troubleshoot process deviation and equipment malfunctions to improve process quality and productivity
  Implement projects, lead a team to improve the process capabilities and reliability
  Improve manufacturing yield and quality

Requirements:

  Degree in Material Science / Electrical & Electronics / Chemical Engineering preferably with relevant working experience in wafer fab industry
  At least 2 year relevant working experience. Diploma holder with >5years relevant experience will be considered too.
  Ability to work in a cross functional team
  Technical skills including problem-solving, statistical data analysis and design of experiment
  Able to perform 12-hour rotating shift

3) Senior/ Equipment Engineers (Etch/Diffusion/CVD/PVD/Wets/Epi)

Job Description

  Systematic troubleshooting of equipment-related problems to minimize equipment downtime.
  Establish optimum spares and consumables stock to support equipment maintenance.
  Establish effective preventive maintenance program me and troubleshooting guide.
  Setup effective detection and monitor system to prevent equipment excursion.
  Coordinate and drive new equipment hookup, startup and release.
  Drive Continuous Improvement project (CIP) to achieve best in class in quality and cost
  Train, coach and certify Assistant Maintenance Engineers and PM Technician in systematic troubleshooting and PM maintenance skill.
  Work closely with Process and production engineers to ensure key performance indices are met.

Requirements:

  Master / Bachelor Degree in Electrical / Electronics / Microelectronics / Mechanical / Mechatronics Engineering.
  At least 2 years relevant working experience or Diploma holder with >5years relevant experience.
  Able to perform 12-hour rotating shift
  Attention to detail and have good analytical and problem solving skills.
  High commitment and good team player.
  Ability to think out of box.
  Good communication and documentation skills.

4) Assistant / Maintenance / Equipment Engineers (EWS / Testing)

Job Description

  Perform schedule preventive maintenance and calibration in adherence to documented working procedures and in a timely manner
  Perform equipment installation of new and transfer equipment in adherence to schedule, quality, safety and ecology specification
  Perform corrective maintenance to ensure the equipment are operate within specification
  Implement equipment improvement and reliability program
  Carry out action plans to reduce cost of equipment maintenance activities.

Requirements:

  Degree in Electronics/Electrical/Mechatronics Engineering with a minimum of 2 years relevant experiences
  At least 2 years relevant working experience or Diploma holder with >5years relevant experience.
  Experience in equipment maintenance will be an added advantage

5) Product Engineers (EWS / Testing)

Job Description

The Product / Test Engineer is responsible for the validation of new optical & high speed link

  Devices designed by the division or directly by the customer diffused in BiCmos technologies (90nm, 55nm, and further).
  To contribute to DFT in order to ensure the device testability on tester
  To contribute to develop the hardware of testing for EWS and FT in conjunction with the Hardware Specialist
  To write test programs/patterns both EWS & FT
  To fully debug the test program and interact with designer in order to fix eventual problems
  To characterize the product vs. corner splits, vs. temperature variation and vs. power supply variation
  To support the devices into production plants being responsible of relevant production yields
  He will work in close cooperation with internal designer community or with customer, quality planning and program management.
  Because of his involvement in different products lines the candidate must have a solid technical skill and be able to fast adapt himself to various technical environments and priorities.
  He must be also familiar with project development criteria like cost, quality, schedule and customer needs.

Requirements:

  Bachelorís Degree in Electronics / Engineering with 4 to 6 years related experience, preferably from similar industry (semiconductors, electronics)
  Prior work experience with skills in (a) Tester Teradyne Catalyst; (b) Advantest 93K on top would be a plus
  Strong in Electronics, Semiconductors physics and is conversant in C++
  Knowledge of high speed interfaces and photonics is a plus
  Desired traits include flexibility, adaptability, fast learning, initiative, autonomy and detail oriented

6) Senior / Device Engineers

Job Description

  Drive and manage the continuous yield and quality improvement
  Monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools coupled with Semiconductor device and manufacturing process knowledge
  Work closely with process, product engineers and Division to fix the problem of low yield, poor quality and reliability issue.
  New products, technology transfer from sister fab and ensure successful production ramp-up with good yield, quality

Requirements:

  Degree in Science (Physics), Electronics/Electrical Engineering or Microelectronics
  Good knowledge and solid understanding of Semiconductor device physics and manufacturing process
  Good knowledge in process integration background especially POWER MOS-SET, BCD, Bipolar & Analog Technology
  Good multi-tasking and problem solving skills using DOE and statistical analysis
  Good interpersonal and communication skills
  Atleast 2 years experience in semiconductor Process Technology, Process Integration, Product / Device engineering. Diploma holder with >5years relevant experience.

7) Failure/Reliability Analysis Engineer (FA Lab, QA)

Job Description

  Able to perform more than one of the below:
  Electrical Analysis using techniques such as Emission Microscopy, OBIRCH, SEI, PVC, Liquid Crystal, Circuit Modifications, Spreading Resistance (SRP), etc
  Reliability Analysis using Parametric Analyzers and reliability techniques such as transistor characterization, oxide integrity.
  Physical Analysis such as delayering (Wet/Dry/Lapping), cross-section (Mechanical & FIB), etc
  Ensure implementation of Laboratory request procedures, tools usage control and sustain an effective quality system in place.
  Develop new methodologies/techniques when required.
  Effective communication on technical details through reports and presentations to engineers, managers and customers.
  Meet the lab requirements in terms of Quality System (ISO-16949 and ISO-17025), EHS (Ecology, Health & Safety) and 5S.

Requirements:

  Degree in Electronics/Electrical Engineering / Semiconductor Device Physics / Material Science/Physics
  Minimum 3 Years relevant experience will be preferred.
  Identify and analyze failure mode using the applicable FA techniques
  Knowledgeable in microelectronics and Si Processing particularly in the manufacturing and development of the POWER/Bipolar & CMOS technology. Knowledge in Failure Analysis/Reliability techniques would be a plus.
  Able to work in manufacturing environment independently with minimum supervision.
  Fast learner, independent and able to work in a cross functional team.

8) Manufacturing Quality Assurance Engineer

Job Description

The position is a key interface between Fabs and divisions, and maximizing internal fab efficiency.

The main responsibilities are

  Manage divisional requests.
  Be the main contact for all standard items related to starts, output plan, rush, delivery urgencies and create a trustful environment.
  Create the necessary links on any questions related to critical points like forecast, qualification plans or products conversion, just to mention some of them.
  Interface with local organization.
  Guarantee information consistency by being the single entry point.
  Drive fab manufacturing efficiency.

Requirements:

  Degree in Engineering
  Minimum 3 Years relevant experience will be preferred.
  Good interpersonal and communication skills

All contents © copyright 2004 SearchHaus. All rights reserved.